Measure first, compensate once

Laser Kerf & Offset Calculator

Calculate laser kerf from a measured test cut, find the half-kerf path offset and adjust outside-part or hole dimensions for a better fit.

Method

How this tool works

Outside test: full kerf = nominal − measured. Hole test: full kerf = measured − nominal. Path offset magnitude = kerf ÷ 2.

Worked example

A nominal 20 mm outside square measuring 19.8 mm has 0.2 mm full kerf and needs a 0.1 mm outward path offset. A desired 30 mm part uses a 30.2 mm uncompensated path.

Use responsibly

Assumptions & limitations

Use an uncompensated cut and measure between parallel edges. Taper, focus, material and axis direction affect the result. Do not combine adjusted geometry with software compensation. Verify the sign convention in your CAM software and test a coupon.

Last reviewed: 3 November 2026
Calculation and copy checked for this release.

Practical guide

Laser kerf versus offset: measure a test cut and avoid double compensation

Measure full laser kerf from an outside part or internal hole, calculate half-kerf offset and check the result with a worked dimensional example.

Read the 5-minute guide