Avoid the factor-of-60 mistake

Laser Speed Converter: mm/s to mm/min

Convert laser cutting and engraving speeds between mm/s, mm/min, inches per second and inches per minute with the conversion formulas shown.

Method

How this tool works

mm/min = mm/s × 60. mm/s = mm/min ÷ 60. One inch = exactly 25.4 mm; convert the distance unit separately from the time unit.

Worked example

20 mm/s = 1,200 mm/min. 1 inch/second = 25.4 mm/s = 1,524 mm/min.

Use responsibly

Assumptions & limitations

This converts units, not material settings. Power, wavelength, focus and machine acceleration differ. Never copy a speed without checking its unit and the machine manufacturer’s instructions.

Last reviewed: 3 November 2026
Calculation and copy checked for this release.

Practical guide

Laser cutting cost calculation formula in Excel: free worksheet

Build a laser cutting price from machine minutes, labour, material and gross margin. Download a free Excel-compatible CSV with editable formulas.

Read the 6-minute guide

Practical guide

Laser kerf versus offset: measure a test cut and avoid double compensation

Measure full laser kerf from an outside part or internal hole, calculate half-kerf offset and check the result with a worked dimensional example.

Read the 5-minute guide