Method
How this tool works
RPM = cutting speed × 1,000 ÷ (π × diameter). Table feed = chip load × RPM × effective teeth.
A 10 mm, 4-flute cutter at 100 m/min and 0.05 mm/tooth runs at about 3,183 RPM and 637 mm/min.
Convert cutting data into machine settings
Calculate spindle speed, table feed, feed per revolution and cutting time from metric tool data.
Method
RPM = cutting speed × 1,000 ÷ (π × diameter). Table feed = chip load × RPM × effective teeth.
A 10 mm, 4-flute cutter at 100 m/min and 0.05 mm/tooth runs at about 3,183 RPM and 637 mm/min.
Use responsibly
Start with tooling and material data from the manufacturer. Machine rigidity, engagement, coolant and workholding can require a lower setting.
Last reviewed: 28 July 2026
Calculation and copy checked for this release.
Practical guide
Understand the relationship between cutting speed, tool diameter, spindle speed, chip load and table feed before entering machine settings.
Finish the job
Check your margin, convert dimensions, combine quote documents, shrink product photos or add a QR code to care instructions.