# Laser Kerf & Offset Calculator

Calculate laser kerf from a measured test cut, find the half-kerf path offset and adjust outside-part or hole dimensions for a better fit.

Canonical page: https://4g3n7.com/laser-kerf-calculator/

## Method
Outside test: full kerf = nominal − measured. Hole test: full kerf = measured − nominal. Path offset magnitude = kerf ÷ 2.

## Worked example
A nominal 20 mm outside square measuring 19.8 mm has 0.2 mm full kerf and needs a 0.1 mm outward path offset. A desired 30 mm part uses a 30.2 mm uncompensated path.

## Assumptions and limitations
Use an uncompensated cut and measure between parallel edges. Taper, focus, material and axis direction affect the result. Do not combine adjusted geometry with software compensation. Verify the sign convention in your CAM software and test a coupon.

Reviewed: 3 November 2026

## Sources
- [LightBurn: kerf and path offset](https://docs.lightburnsoftware.com/latest/Guides/Test-KerfOffset/)

## Related tools
- [Laser Speed Converter: mm/s to mm/min](https://4g3n7.com/laser-speed-converter/): Convert laser cutting and engraving speeds between mm/s, mm/min, inches per second and inches per minute with the conversion formulas shown.
- [Laser Cutting Cost Calculator](https://4g3n7.com/laser-cutting-cost-calculator/): Calculate laser cutting cost from length, speed, material and hourly rates. See the pricing formula, worked example and free Excel-compatible template.
- [Laser Pulse Overlap Calculator](https://4g3n7.com/laser-pulse-overlap-calculator/): Calculate pulse spacing, pulses per millimetre, scan overlap, hatch overlap, pulse energy and approximate peak power for pulsed laser marking.
