# Laser kerf versus offset: measure a test cut and avoid double compensation

Measure full laser kerf from an outside part or internal hole, calculate half-kerf offset and check the result with a worked dimensional example.

Canonical: https://4g3n7.com/blog/laser-kerf-offset-measurement/

Published: 2026-11-03. Reviewed: 2026-11-03.

## Short answer
Kerf is the full width removed by the beam. The geometric path offset is half that width. An uncompensated 20 mm square measuring 19.8 mm implies 0.2 mm kerf and a 0.1 mm outward offset.

A press-fit joint can fail even when the drawing dimensions look right. Measuring your own uncompensated test cut gives a useful starting point; a different material, focus or axis may need another test.

## Use the measurement direction for your feature
For an outside part, subtract measured size from nominal size. For a hole, subtract nominal size from measured size. A 20.2 mm hole on a 20 mm nominal path indicates 0.2 mm kerf. Measure between opposite parallel edges, with existing compensation disabled.

If an outside part is bigger than nominal or a hole smaller, do not take an absolute value and trust it. Check the measurement, compensation and machine scale first.


## Choose geometry adjustment or software offset
For a target 30 mm outside part with 0.2 mm kerf, use an uncompensated 30.2 mm path or a 30 mm drawing with a 0.1 mm outward offset. For a 30 mm hole, the uncompensated path becomes 29.8 mm.

Apply only one method. Software may interpret a kerf field differently from a path-offset field; inspect its documentation and preview. This calculator reports magnitude, not a universal signed setting.


## Repeat the test when the process changes
Material thickness, speed, power, focus and beam shape affect the measured result. A rectangular spot can give different horizontal and vertical values. Test-fit a representative joint before using a whole sheet.

Kerf compensation does not resize joints for a different sheet thickness. Adjust tab and slot design for actual material thickness as a separate step.


## Sources
- [LightBurn: measuring and applying kerf offset](https://docs.lightburnsoftware.com/latest/Guides/Test-KerfOffset/)

## Related tools
- [Laser Kerf & Offset Calculator](https://4g3n7.com/laser-kerf-calculator/): Calculate laser kerf from a measured test cut, find the half-kerf path offset and adjust outside-part or hole dimensions for a better fit.
- [Laser Speed Converter: mm/s to mm/min](https://4g3n7.com/laser-speed-converter/): Convert laser cutting and engraving speeds between mm/s, mm/min, inches per second and inches per minute with the conversion formulas shown.
- [Laser Cutting Cost Calculator](https://4g3n7.com/laser-cutting-cost-calculator/): Calculate laser cutting cost from length, speed, material and hourly rates. See the pricing formula, worked example and free Excel-compatible template.
